Quick Cleaning Fast Delivery Degassing Tattoo Equipment Ultrasonic
1. Necessity of Tattoo Equipment Ultrasonic Cleaner
Common tools found . clean and sterilize some tattoo machine are
generally autoclaves and ultrasonic cleansers.
Just before sterilization, the tattoo machines, needles and tubes
must be cleaned completely when each use or at the very least
daily. The best and easiest tool to fix a tattoo machine before
sterilization is normally ultrasonic cleaner. It might clean all
continuing to be tattoo ink include any tiny hole and dead approach
without chemical reactions towards the machines.
But keep observe that although the ultrasonic cleansers performance
great around killing Escherichia coli and Staphylococcus. But
bacteria like HIV may only be sterilized through autoclave
sterilizer, that’s why it becomes the sole professional tool for
Effectiveness of Beauty Salon Ultrasonic cleaner over other methods
2. How Tattoo Equipment Ultrasonic Cleaner work
Cleaning is provided by cavitation action, which is the implosion
of microscopic-sized bubbles in an ultrasonic cleaning solution as
they contact the surface of the instruments. It is created by
ultrasonic transducers excited to ultrasonic frequencies such as
37,000 cycles per second (37 kHz). The bubbles are small enough to
penetrate cracks and crevices impossible to access by hand
scrubbing. They safely blast away remaining contaminants.
(1)Degas function enhances cleaning effect and reduce oxidation on
your Tattoo tool.
(2)Strong power for cleaning tattoo tool
(3)5 times digital time setting to meet your different cleaning
(5)Suitable frequency for tattoo tool.
4.Why tattoo equipment ultrasonic cleaning is an important first
tates are implementing regulations governing the operation of
tattoo and body piercing parlors much as they have for hair salons
and nail salons. For example, Washington state has posted WAC
246-145-060 “Sterile procedures in body art, body piercing and
tattooing.” It states in part that as soon as practical after use
reusable instruments must be brushed or swabbed to remove foreign
material or debris and rinsed.
A suggested follow-on procedure is immersing instruments in
detergent and water in an ultrasonic cleaning tank used according
to the manufacturer’s instructions. This is followed by rinsing and
drying prior to packaging for sterilization. In other words, tattoo
parlor instrument cleaning is much the same as used for cleaning
medical and surgical instruments.
5.How to clean tattoo tool with Skymen tattoo ultrasonic cleaner?
After pre-cleaning to remove gross contaminants, reusable tattoo
equipment can be placed in an ultrasonic cleaner such as the
half-gallon capacity 40 kHz Skymen JP-2500. Available from Skymen
it has a tank size 248x150x78mm. But first the ultrasonic cleaner
must be filled with an approved medical instrument cleaning
solution, and degassed to drive off cavitation-inhibiting trapped
air. This is accomplished by turning on the unit and letting it
operate without a load for approximately 10 minutes or until air
bubbles stop coming to the surface.
When everything is ready place the instruments in the ultrasonic
cleaner’s mesh basket, taking care that they do not come in contact
with each other. Lower the basket in the solution and set the timer
as recommended by the manufacturer.
At the end of the cleaning cycle remove and visually inspect the
instruments to be certain all residues are removed. Rinse and dry
them prior to sterilization.
|Tank capacity||22L||Timer||1-30 mins|
|Tank size||500x300x150mm||Unit size||585*330*280mm|
|Box packing||635*405*335 mm||Function||Degasing/Draining|
|Ultrasonic power||360W||Heating power||300W|
AC 100 ~ 120V, 60Hz ; AC 220 ~ 240V, 50Hz
If this tank size is not suitable for your dental tool cleaning, we
have other smaller or bigger machine for you to choose.Please check
other model below:
9. Skymen Policy For Distributor
We are only specializing in designing and producing ultrasonic
cleaner so we need our partners in medical industry,always!
We will keep our quality and competitive price for our distributor.
If you would like to cooperate with us, please contact me directly.
10. Skymen Advantage
We have been in this industry for 10 years and we are supplying
machines to all seller all over the world.All distributor is
welcome for win-win coperation.
We have passes ISO,High Tech Company,CE,RoHS,FCC, National Medical